Tractor Maintenance Guide
Tractor Maintenance Guide
1. Running-in is also called trial operation. The newly purchased or overhauled dragging should be run-in according to the regulations. Running-in is divided into three stages: no-load running-in of the engine, empty running-in of the whole machine and running-in of the whole machine with load. In addition to the long life of the tractor, the power will also increase slightly, the fuel and oil consumption will be reduced, and the failure will be reduced.
2. Maintenance refers to the basic activities of the tractor, such as cleaning, supply inspection, adjustment and fastening, lubrication and replacement of wearing parts. Divided into daily maintenance and regular maintenance.
Daily maintenance is carried out at the beginning or end of each shift or day. It is mainly to remove straw weeds and soil on the tractor, check fasteners, belts, lubrication points, water tanks, instruments, filters, etc., check the operation of the engine chassis operating mechanism, and deal with the problems found.
Regular maintenance is carried out after the tractor works for a period of time, which can be divided into one to four levels. The maintenance period is calculated according to the accumulated working hours. It mainly cleans the coarse filter elements of air, diesel, and engine oil, and releases the dirty oil in the steering clutch and flywheel housing. Check the free stroke of the clutch and brake, and inject grease into the grease fittings of each part. Secondary maintenance, generally carried out once a year or three or four after performance, is mainly to clean or replace air, diesel, oil and other related fine filters and filters, replace the lubricating oil of the engine fuel injection pump and governor, clean the hydraulic system, and Replace hydraulic pressure, oil check battery electrolyte, and add distilled water in time. The three-level and four-level maintenance mainly focuses on the disassembly, cleaning, inspection, adjustment, and replacement of the engine, chassis, control, hydraulic, and electrical assemblies. This is going to the maintenance point.
, we must abandon the habit of emphasizing repair and neglecting maintenance, or even replacing old maintenance with repair. It seems to be expensive and time-consuming, but in fact it saves trouble and has high efficiency.
3, parking is divided into temporary parking and long-term parking. After daily operation during the operation period, the tractor can be temporarily parked in the parking place or warehouse on the hard ground, and the hanging machines and tools can be unloaded and neatly parked on the ground for easy access. For the completion of a working season, the tractor should be maintained under the four principles of cleaning, relaxation, lubrication and safety, and then put into storage for a long time. When there is no warehouse, the tractor shall be tightly covered and parked in the yard to prevent sun and rain.
For different types of tractors, the specific maintenance content shall be operated in accordance with the instruction manual.
Source: Qiqihar Association for Science and Technology
