Created on:2025-09-11

Agricultural (plant protection) unmanned aerial vehicle maintenance points

Agricultural (Plant Protection) Unmanned Aerial VehicleMaintenance Points

(I) routine maintenance before takeoff

1. Check whether the propeller, arm, motor base, steering gear, tripod, side beam and carbon frame are in good condition. If foreign matter is found, it should be cleaned in time. If cracks or defects are found, it should be replaced in time.

2. Test run the power motor, check whether the installation is firm, whether there is any empty position, whether the rotation is smooth and free of abnormal noise, and repair in time if any problem is found.

3. Test run the centrifugal nozzle, check whether the installation is firm, whether the rotation is smooth, whether the spray plate is complete, and repair the problem in time.

4. Check whether the RTK antenna is installed in good condition, and repair it in time if any problem is found.

5. Check whether there is any foreign matter in the medicine inlet and filter screen of the medicine cabinet, and clean up any foreign matter found in time.

6. Check whether the viewing angle image lens is clean. In order to prevent the lens from being scratched, it is recommended to use a glasses cloth to wipe it from left to right.

7. Check whether the surface of ground-like radar and front-mounted dynamic radar is clean, free from foreign matter and stable installation. If any problem is found, repair it in time.

8. Check the battery socket for foreign matter. If the metal is black, clean it up in time.

9. Check whether the battery buckle is damaged. When installing the battery, a "click" sound indicates that the installation is firm, otherwise timely maintenance is required.

(II) control system

1. Open the aircraft control App and check whether the App version and equipment firmware need to be updated. If there is any update, please complete the update operation immediately according to the prompt (note: please ensure that all firmware is upgraded to the latest version before each flight).

2. Check and repair the "one-hand control binding" according to the requirements of the product specification, and confirm the binding of one-hand control equipment.

3. Repair the "communication system" according to the requirements of the product specification, and check whether the communication signal is good and the display is normal.

4. Repair the "positioning system" according to the requirements of the product specification, and check whether the base station is connected and whether it enters RTK.

5. Overhaul the "power system" according to the requirements of the product specification, confirm that the battery power can meet the current operation requirements, and the battery cell voltage is green to indicate normal.

6. according to the requirements of the product specification "spray system" maintenance, manual spray test. Make sure that the spraying system is unobstructed, the pipeline is free of rupture and leakage of medicine, the spraying plate rotates normally, and the flowing liquid is free of bubbles.

7. Check and repair the "power system" according to the requirements of the product specification, carry out idle speed test, and confirm that the motor turns normally without abnormal noise.

8. Check and repair the "perception system" according to the requirements of the product specification, and confirm that the terrain module and obstacle avoidance radar are normal.

(III) safety operation tips

1. Drunk, lack of sleep, illness, pregnant women, under 18 years of age, without qualification certificate is not allowed to operate.

2. Operation cannot be carried out in the field without safe landing point within 1 mu.

3. After the operation, stop the engine, turn off the power of the remote control, put the remote control in the toolbox, and take out the key.

4. In the event of an emergency, the aircraft shall fly away from the crowd in the fastest possible way and land or make a forced landing as soon as possible.

5. The operator must understand the knowledge of the use of machinery and the nature of the agent, and master the measures to prevent poisoning and rescue methods.

6. Operators must wear protective equipment before operation. After operation, all body parts and protective equipment in contact with drugs must be washed with soap and water.

7. The agent box, pipeline and interface of the aircraft shall not leak, and the working pressure during operation shall not exceed the specified value. The pressure in the box shall be removed before troubleshooting and disassembly of joints and nozzles.

8. No open flame lighting is allowed when repairing or adding chemicals at night.

9. At the end of the operation, the machinery shall be thoroughly cleaned in a suitable place and water contamination shall be prevented.

Source: Public Number Sangma Words Liangzhou

Website: https://mp.weixin.qq.com/s/ZTSndPLw1mcZo3Bfs2hvUA


田间管理机械培训维修

Created on:2025-09-11

Agricultural (plant protection) unmanned aerial vehicle maintenance points

Agricultural (Plant Protection) Unmanned Aerial VehicleMaintenance Points

(I) routine maintenance before takeoff

1. Check whether the propeller, arm, motor base, steering gear, tripod, side beam and carbon frame are in good condition. If foreign matter is found, it should be cleaned in time. If cracks or defects are found, it should be replaced in time.

2. Test run the power motor, check whether the installation is firm, whether there is any empty position, whether the rotation is smooth and free of abnormal noise, and repair in time if any problem is found.

3. Test run the centrifugal nozzle, check whether the installation is firm, whether the rotation is smooth, whether the spray plate is complete, and repair the problem in time.

4. Check whether the RTK antenna is installed in good condition, and repair it in time if any problem is found.

5. Check whether there is any foreign matter in the medicine inlet and filter screen of the medicine cabinet, and clean up any foreign matter found in time.

6. Check whether the viewing angle image lens is clean. In order to prevent the lens from being scratched, it is recommended to use a glasses cloth to wipe it from left to right.

7. Check whether the surface of ground-like radar and front-mounted dynamic radar is clean, free from foreign matter and stable installation. If any problem is found, repair it in time.

8. Check the battery socket for foreign matter. If the metal is black, clean it up in time.

9. Check whether the battery buckle is damaged. When installing the battery, a "click" sound indicates that the installation is firm, otherwise timely maintenance is required.

(II) control system

1. Open the aircraft control App and check whether the App version and equipment firmware need to be updated. If there is any update, please complete the update operation immediately according to the prompt (note: please ensure that all firmware is upgraded to the latest version before each flight).

2. Check and repair the "one-hand control binding" according to the requirements of the product specification, and confirm the binding of one-hand control equipment.

3. Repair the "communication system" according to the requirements of the product specification, and check whether the communication signal is good and the display is normal.

4. Repair the "positioning system" according to the requirements of the product specification, and check whether the base station is connected and whether it enters RTK.

5. Overhaul the "power system" according to the requirements of the product specification, confirm that the battery power can meet the current operation requirements, and the battery cell voltage is green to indicate normal.

6. according to the requirements of the product specification "spray system" maintenance, manual spray test. Make sure that the spraying system is unobstructed, the pipeline is free of rupture and leakage of medicine, the spraying plate rotates normally, and the flowing liquid is free of bubbles.

7. Check and repair the "power system" according to the requirements of the product specification, carry out idle speed test, and confirm that the motor turns normally without abnormal noise.

8. Check and repair the "perception system" according to the requirements of the product specification, and confirm that the terrain module and obstacle avoidance radar are normal.

(III) safety operation tips

1. Drunk, lack of sleep, illness, pregnant women, under 18 years of age, without qualification certificate is not allowed to operate.

2. Operation cannot be carried out in the field without safe landing point within 1 mu.

3. After the operation, stop the engine, turn off the power of the remote control, put the remote control in the toolbox, and take out the key.

4. In the event of an emergency, the aircraft shall fly away from the crowd in the fastest possible way and land or make a forced landing as soon as possible.

5. The operator must understand the knowledge of the use of machinery and the nature of the agent, and master the measures to prevent poisoning and rescue methods.

6. Operators must wear protective equipment before operation. After operation, all body parts and protective equipment in contact with drugs must be washed with soap and water.

7. The agent box, pipeline and interface of the aircraft shall not leak, and the working pressure during operation shall not exceed the specified value. The pressure in the box shall be removed before troubleshooting and disassembly of joints and nozzles.

8. No open flame lighting is allowed when repairing or adding chemicals at night.

9. At the end of the operation, the machinery shall be thoroughly cleaned in a suitable place and water contamination shall be prevented.

Source: Public Number Sangma Words Liangzhou

Website: https://mp.weixin.qq.com/s/ZTSndPLw1mcZo3Bfs2hvUA