Created on:2025-09-11

Agricultural machinery Field work Protection Power facilities Common sense

Agricultural machinery Field work Protection Power facilities Common sense

(I) drivers should have a comprehensive understanding of the distribution of power facilities in the operation area and surrounding areas, including the location and direction of telephone poles, transformers, overhead wires, etc., before entering the farmland for operation. They should carefully operate agricultural machinery vehicles near the power facilities to avoid accidental collision with power facilities.

(II) drivers should check the condition of agricultural machinery before operation, carefully check the height, width and related parts of agricultural machinery, to ensure that there is no potential safety hazard that may touch power facilities, such as checking whether the metal parts of agricultural machinery are loose, warped and other possible contact with wires. For agricultural machinery with lifting devices, check whether the lifting function is normal and whether the limiting device is effective.

When the (III) is operating in the area with overhead power lines, the agricultural machinery and the overhead power line conductors should be kept at a sufficient safe distance. 1-10 kV line is not less than 3 meters, 35-220 kV line is not less than 5 meters.

(IV) drivers should pay attention to the height of the line. If they encounter power lines across farmland, the operators should observe the height of the line in advance, drive slowly through, and get off the car to check when necessary to ensure that the agricultural machinery will not touch the line.

(V) should report to the local power supply station in time if it is found that there are potential safety hazards in power facilities during operation, such as damaged wires and tilt of telephone poles, so as to deal with them in time and eliminate potential safety hazards.

After the operation of (VI) agricultural machinery is completed, it should be parked in a safe area far away from the power facilities to avoid the impact on the power facilities due to improper parking or the dumping of the power facilities caused by the collision of passing vehicles.

It is strictly forbidden to carry out any dangerous operations near power facilities that may cause agricultural machinery to come into contact with power lines, such as lifting large parts of agricultural machinery under overhead power lines, and performing high-altitude operations.

Source: Daqing Agricultural and Rural Bureau

Website: https://mp.weixin.qq.com/s/WKthki8nBbGHLYH8suo-jQ



其他机械培训维修

Created on:2025-09-11

Agricultural machinery Field work Protection Power facilities Common sense

Agricultural machinery Field work Protection Power facilities Common sense

(I) drivers should have a comprehensive understanding of the distribution of power facilities in the operation area and surrounding areas, including the location and direction of telephone poles, transformers, overhead wires, etc., before entering the farmland for operation. They should carefully operate agricultural machinery vehicles near the power facilities to avoid accidental collision with power facilities.

(II) drivers should check the condition of agricultural machinery before operation, carefully check the height, width and related parts of agricultural machinery, to ensure that there is no potential safety hazard that may touch power facilities, such as checking whether the metal parts of agricultural machinery are loose, warped and other possible contact with wires. For agricultural machinery with lifting devices, check whether the lifting function is normal and whether the limiting device is effective.

When the (III) is operating in the area with overhead power lines, the agricultural machinery and the overhead power line conductors should be kept at a sufficient safe distance. 1-10 kV line is not less than 3 meters, 35-220 kV line is not less than 5 meters.

(IV) drivers should pay attention to the height of the line. If they encounter power lines across farmland, the operators should observe the height of the line in advance, drive slowly through, and get off the car to check when necessary to ensure that the agricultural machinery will not touch the line.

(V) should report to the local power supply station in time if it is found that there are potential safety hazards in power facilities during operation, such as damaged wires and tilt of telephone poles, so as to deal with them in time and eliminate potential safety hazards.

After the operation of (VI) agricultural machinery is completed, it should be parked in a safe area far away from the power facilities to avoid the impact on the power facilities due to improper parking or the dumping of the power facilities caused by the collision of passing vehicles.

It is strictly forbidden to carry out any dangerous operations near power facilities that may cause agricultural machinery to come into contact with power lines, such as lifting large parts of agricultural machinery under overhead power lines, and performing high-altitude operations.

Source: Daqing Agricultural and Rural Bureau

Website: https://mp.weixin.qq.com/s/WKthki8nBbGHLYH8suo-jQ