China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
Xingguang Agricultural Machinery 4LZ-5.0Z Full Feed Combined Harvestmachine
product introduction:
chassis part: unique strong eight beam structure, strong load bearing capacity, improve traffic capacity
frame is 650mm, which effectively solves the unique roller design of mud clamping phenomenon when the upper and lower machines are operating in rotten fields-the outer wheel body is widened to 48mm (the widest of the same type) to delay the service life of the crawler, increasing the contact area with the crawler and effectively delaying the service life of the crawler; The guide wheel adopts a four-lip self-rotating compression type shaft oil seal, which is multi-proof and multi-proof, effectively prevents muddy water from entering and delays the service life. Tension structure upgrade-firmer and more reliable walking tension adopts super-large tension spring self-lubricating bearing structure to improve working stability and prevent tension spring failure. The working tension seat structure adopts two-point support to effectively improve working stability and reliability. The guide wheel strut bolt is increased to M20 to further improve the turning load bearing capacity of rotten fields and prevent deformation and bending. Threshing and cleaning part: the design of super-large threshing roller with 640mm super-diameter and 2041mm super-long structure is better separation effect, large impact surface, prolonged impact time, better separation effect, especially for varieties that are difficult to thresh, effectively solving the problem of entrainment; Unique belt transmission structure-easier transmission and unique non-winding structure, each belt only drives one load, reduces belt stress, prolongs service life, makes power transmission more stable, lower maintenance cost and more efficient cleaning structure-unique arc-shaped stainless steel fan blades with higher cleaning effect, the air volume is larger and the adjustment range is wider. The vibrating screen adopts a three-layer structure, so that the crops are more evenly dispersed and the cleaning effect is better..The conveying part of the header: the reel is upgraded-the grass is not entangled more smoothly. All elastic teeth are used, and the protective cover can be used to effectively improve the ability to prevent entanglement and strengthen the effect of harvesting lodging crops. The reel dial adopts a new overall structure, the main shaft diameter is thickened, the bearing load is high, and the grain is smoother. Oil tank and grain tank: increase the oil tank, increase the oil tank capacity 210L and increase the rear position, and increase the grain tank to 1600L to meet the needs of long-term continuous operation.
product parameters:
|
Product Model Name |
/ |
4LZ-5.0Z |
|||||
|
structure type |
/ |
Crawler self-walking full feed type |
|||||
|
matching engine |
structure type |
/ |
In-line water-cooled four-stroke supercharged intercooled |
||||
|
Rated power |
kW |
78 |
81 |
||||
|
Rated speed |
r/min |
2400 |
|||||
|
Dimensions (L×W×H) |
mm |
5120 × 2620 × 2870 |
|||||
|
Quality of the whole machine |
kg |
2985 |
|||||
|
Header Width |
mm |
2200/2100 (optional) |
|||||
|
feeding quantity |
kg/s |
5.0 |
|||||
|
Minimum ground clearance |
mm |
300 |
|||||
|
Theoretical operation speed |
km/h |
0~5.69;0~8.17 |
|||||
|
Operation Hour Productivity |
h㎡/h |
0.35~0.55 |
|||||
|
Fuel consumption per unit area |
kg/h㎡ |
≤ 32 |
|||||
|
reel |
type |
/ |
Eccentric gear shifting type |
||||
|
diameter |
mm |
Φ900 |
|||||
|
plates |
|
5 |
|||||
|
threshing drum |
Quantity |
|
1 |
||||
|
type |
Main drum |
/ |
axial flow nail tooth type |
||||
|
Sub-drum |
/ |
||||||
|
size (outer diameter × length) |
Main drum |
mm |
Φ640 × 2018 |
||||
|
Sub-drum |
/ |
||||||
|
Fan |
type |
/ |
flow-through |
||||
|
diameter |
mm |
Φ400 |
|||||
|
Quantity |
|
1 |
|||||
|
Gauge |
mm |
1150 |
|||||
|
track specification (pitch × pitch × width) |
mm |
90mm × 53 knots × 450mm/500mm (optional) |
|||||
|
Gearbox Type |
/ |
three-speed gear transmission hydraulic continuously variable transmission (HST) |
|||||
|
Stalk chopper type |
/ |
blade rotary |
|||||
|
Brake Type |
Wet friction plate type |
||||||
|
Cab Type |
/ |
None |
|||||
|
Grain receiving method |
/ |
Mechanical grain unloading/mechanical high-position grain unloading (optional) |
|||||

