China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
5HXG-30E batch circulating grain dryer
high efficiency
● Using low temperature and large air volume thin layer material drying technology, the drying efficiency is increased by more than 10%, while ensuring that the dried grains remain high quality.
high quality
● Unique drying system, no dead angle, uniform drying, uneven rate ≤ 1%;
Special high temperature resistant grain barbecue fan, high temperature resistant up to 80 ℃, with high efficiency, low noise, compact structure, small footprint, power consumption is 10% smaller than the traditional fan, life increased by 20%;
● Fully automatic drying control system, comprehensive and systematic reliable data, control the drying temperature according to the grain moisture to ensure the grain quality;
The material flow mechanism adopts wear-resistant stainless steel material to improve the working life of the machine by more than 50%;
● The machine running bearings are all high quality maintenance-free bearings to extend the life of the machine and improve the reliability of the machine.
low crushing
● Anti-blocking and wear-resistant stainless steel pipes are adopted to reduce the crushing rate of mechanical conveying materials;
Low-speed anti-crushing hoist, low-speed can prevent the grain from crushing during loading and unloading in vertical transportation; polymer wear-resistant winch, unique unloading gas and edge design, soft contact with the grain, high loading efficiency, reduce grain friction and crushing; anti-material feeding roller mechanism, effectively prevent the grain from entering the lower drum and crushing between the bucket.
intelligent
● Equipped with online moisture meter, real-time dynamic and accurate monitoring of grain moisture, reaching safe moisture, automatically closing hot air into natural air cooling operation mode;
● Equipped with remote monitoring and data feedback module to realize customer remote monitoring of real-time machine usage.
form of heat source
● can choose a variety of general heat source heating: biomass hot blast stove, electric heat pump, oil burner, natural gas burner, steam.
|
Model |
Unit |
parameters |
|
|
structure type |
/ |
Batch Cycle |
|
|
drying method |
/ |
indirect heating |
|
|
Drying Process |
/ |
crossflow |
|
|
dryer body (length × width × height) |
mm |
3080 × 2790 × 11880 |
|
|
Batch Volume |
t |
30 |
|
|
precipitation rate |
%/h |
0.6~1.2 |
|
|
effective volume |
m3 |
54.3 |
|
|
Hot air temperature range |
℃ |
30-120 |
|
|
hot air blower type (positive pressure/negative pressure) |
/ |
negative pressure |
|
|
|
kW |
20.02 |
|
|
Required Power |
V/Hz |
Three-phase four-wire with grounding 380/50 |
|
|
Heat source type |
/ |
Biomass hot blast stove, electric heat pump, oil burner, natural gas burner, steam |
|
|
Required heat source thermal power |
KJ/h |
≥ 1250000 |
|
|
Security Configuration |
/ |
Hot air temperature sensor, circuit breaker, thermal relay, AC contactor abnormal overheating, overload, short circuit, open circuit protection, full load alarm |
|

