China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
Taishan GT1600-1(G4) wheeled tractor
product introduction:
power:
1. Equipped with Dongfanghongguo four-six-cylinder engine, with a torque reserve of 35%, strong power, low fuel consumption and high reliability.
2, the configuration of EGR + DOC + DPF after-treatment technology, without urea, economical and reliable.
practical and efficient:
1 and 16+8 are equipped with crawling gears, with a minimum speed of 0.396 km/h and a maximum speed of 33.34 km/h, which can meet various farmland operations.
2. Equipped with radial tires, the ground contact area is increased by more than 20%, greater grip, higher efficiency, and more fuel consumption savings.
3. Dual-pump hydraulic system, independent steering pump, hydraulic pump flow up to 72 liters/minute, more sensitive and more efficient.
4. The standard 210L enlarged fuel tank has a working time of at least 13.5 hours, longer endurance and larger output.
driving comfort:
1. Fully enclosed luxury cab with wide vision; Air conditioning, closed positive pressure up to 50Pa, dust blocking, clean and comfortable.
2, equipped with heating and air conditioning, suspended seats, combined with national standards and SAE standards, people-oriented man-machine control, more handy to use, more comfortable and pleasant to drive.
product parameters:
Vehicle drive form | two-drive drive | |||||
Vehicle (length * width * height) mm | 5000*2110*3030 (cab roof) | |||||
wheelbase mm | 2510 | |||||
wheel track | Front track mm | 1520 (factory), 1610, 1710, 1810, 1954, 2202 | ||||
Rear track mm | 1620 (factory) ~ 2020 | |||||
Minimum ground clearance mm | 480 (bottom of lift cylinder) | |||||
Minimum service mass kg | 4400 | |||||
counterweight | Front counterweight kg | 320 | ||||
rear counterweight kg | 160 | |||||
engine | Model | Dongfanghong Six-cylinder National Four | ||||
Calibration power (12h)Kw | 117.7 | |||||
Calibration speed r/min | 2200 | |||||
Displacement L | 6.49 | |||||
Maximum torque N · m | 744N·m @1500rpm | |||||
Gear | 16F + 8R | |||||
suspension system | type | Class III | ||||
Maximum lifting force kN | 37.6 | |||||
hydraulic valves | Group 2 | |||||
power output shaft | speed r/min | 760/850 optional 540/760 | ||||
output shaft structure | 8 key shaft diameter 38mm | |||||
Output power kW | 105.9 | |||||
Maximum traction force kN | 33.5 | |||||

