China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
Lei Mu 2204 wheeled towingmachine
product introduction:
1. The Weichai Deutz engine is selected, which is supercharged and intercooled, has strong power, and the torque reserve is greatly increased compared with traditional products, and the economy is good; it is equipped with a special and enhanced front axle, which is twice the torque of traditional products;
2. The side shuttle shift of the gearbox synchronizer has a large number of gears, 16 forward gears and 16 reverse gears.
3. The chassis bearings and seals adopt well-known brands to comprehensively overcome the problems of large noise and easy oil leakage from all aspects, and greatly reduce the incidence of common frequent failures;
4. Equipped with high-grade fully enclosed cab (with air conditioning, sunshade, DVD), humanized design, comfortable driving and meeting the requirements of ergonomics;
5. The rear tire can be equipped with single wheel or double wheel according to the demand.

product parameters:
Model | LEIMU-2204 | ||
driving mode | 4 × 4 four-wheel drive | ||
Dimensions (L×W×H) mm | 5600 × 3560 × 3200 | ||
track (front wheel/rear wheel) or gauge mm | 1680/2380 | ||
Minimum ground clearance (ground clearance) mm | 450 | ||
Minimum service mass kg | 8300 | ||
Front axle mass/Rear axle mass kg | 3690/4610 | ||
gears (forward/reverse) | 16/16 | ||
Travel speed | forward | L Low: 3.42/4.47/5.55/6.88 | |
km/h | L high: 6.63/8.87/10.77/13.33 | ||
| H Low: 7.50/9.80/12.18/15.07 | ||
| H high: 16.93/22.13/27.49/34.03 | ||
| Back | L Low: 2.33/3.05/3.79/4.69 | |
| L high: 4.52/5.91/7.35/9.10 | ||
| H Low: 5.12/6.69/8.81/10.28 | ||
| H high: 11.55/15.10/18.76/23.22 | ||
engine | Brand | Weichai Deutz | |
Calibration power KW | 162 | ||
Fuel tank volume L | 320 | ||
tire model (front wheel/rear wheel) | 18.4-26/20.8-38 | ||
Number of power output shaft splines | 8 | ||
Power output shaft speed r/min | 540/1000 | ||
