China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
5HHCY-32 (cross-flow) grain dryer
product introduction:
· Up and Downwithout auger design: Cancel the original dryerUpper and lower auger structure, hoist feedand grain discharge areadopts inclined chute, using the weight of the grain to fall freely, without crushing.
·Upper and lower auger design: The original upper and lower auger structure of the dryer is cancelled. The elevator adopts inclined chute for grain feeding and discharging, and the grains fall freely under their own weight without crushing.
· Front push and rear pull large air volume design:drying sectionis equipped with 3 diagonal flow fans, air inletone fanPositive pressure air supply and air outletfannegative pressure suction, balance the air volume, reduce resistance, improve the utilization rate of hot air.
·Design of large air volume by pushing forward and pulling back: The drying section is equipped with 3 diagonal fans, one fan at the air inlet provides positive air pressure, and two fans at the air outlet suction air to balance the air volume, reduce resistance, and improve the utilization rate of hot air.
· Bigdrying sectionDesign:Height of drying section1.6m or more, two-stage combination, high strength and no deformation,dry layerflow rate is stable, the drying is uniform, and the drying rate is high.
·Large drying section design: the height of the drying section is more than 1.6m, the two sections are combined, the strength is high, and the drying layer is reasonable, stable flow rate, uniform drying, and high drying rate.
· Separate dust removal design: The head of the hoist is equipped with a separate dust removal fan and pipeline, which can take away the dust and light impurities of the grain in the circulation process in time, so as to make the grain cleaner, greatly reduce the dust in the processing room, and improve the environmental quality of the operation site.
· Separate dust removal design: Separate dust removal fans and pipes are installed at the head of the hoist, which can take away the dust and light impurities in the grain circulation process in time, so that the grains are cleaner, the dust in the processing room is greatly reduced, and the operation is improved On-site environmental quality.
· Automatic temperature control: air inletrelatedair door and air distribution door can always control the hot air temperature at ± 5-7 of the set temperature according to the set temperature requirements and the temperature tested by the temperature sensor.℃range.
· Automatic temperature adjustment control: The inlet of the air is equipped with the relevant air door and the air door, and the temperature of the hot air can always be controlled within the range of ±5-7°C of the set temperature according to the set temperature requirements and the temperature tested by the temperature sensor.
and accurate moisture control: the control interface of the new electric control box is clearer, and the program control of various materials such as rice, wheat, rapeseed and corn is added. the selected materials can be dried at one key, and different moisture contents can be dried at different temperatures to best ensure the material quality. The electric control box can choose domestic moisture meter or imported moisture meter and new sensor moisture meter (under test and successfully promoted) to ensure the moisture measurement within the range of +/-0.5, guaranteed food quality.
·Accurate moisture control: The control interface of the new electric control box is clearer, and the program control of various materials suchas rice, wheatrapeseedand corn has been added. The selected materials can be dried with one button. Different moistures can be dried at different temperatures. Good to ensure the quality of the material; the electric control box can choose domestic moisture meter or imported moisture meter and new sensor moisture meter (under test and will be promoted after success) to ensure that the moisture measurement is within ±0.5% to ensure grain quality.
product parameters:


